Builder Merchant

Monday 17 December 2018

Steps To Install The Tongue and Groove Panelling On The Ceilings and Walls

Installing the MDF tongue and groove panels will surely change the look of your home better than the previous settings. Often, people ignore the importance of using this method, which leads to poor consequences like less appreciation and applauds for the interior setups. However, in this competitive era, most of the individual is considering a fact that interior space needs to be creative and unique, which can grab the attention of the visitors, and this is the time when the MDF tongue and groove Panelling comes into the limelight.

Implementing this option in your home will benefit you in many ways. Amidst these scenarios, a layman cannot understand the installation process of MDF tongue and groove panels. So, it would be better if you will opt for professionals. If you want to get started with the Panelling projects, then learn a few tips here before you delve deep into the process. Understand why people mostly choose MDF tongue and groove Panelling process.

Choose Your Preferred Area

Before you begin with the installation, have a glance at what sort of equipment you need to carry forward the tasks and from which part, you will start the Panelling process. MDF tongue and groove panels would be the best option in today's world as it will give you a finished and polished look ever.

However, you will get the MDF woods easily from the markets at reasonable prices. Choose something, which will suit your choice and décor of the rooms. Because of the countless options and varieties in the marketplace, MDF tongue and groove Panelling methods are mostly preferred.

Figure Out The Amount Of Material Required

To install the MDF woods in the ceiling and walls, you need to measure the height and length of the room initially. After analyzing the size, height, length, and breadth, you need to decide how much materials will be required to complete the entire task. MDF Tongue And Groove Panelling are no doubt one of the best options for walls and ceiling, but, you need to very careful while using the panels.

Start to Assemble

Before you install the MDF tongue and groove panels, remove all the old trim from the walls. You don't worry about perfection. Once you start the process of installing the MDF woods on the panels, you will automatically catch the rhythm, and things will smoothly fall in its place. There will be no sort of matching issues in relatively large areas. For the best look, you can opt for differently colored MDF woods.

Tuesday 27 November 2018

Tips to Choose the Right Blades to Cut MDF Boards

Builders merchant 0 Comments

MDF or medium-density fibreboard is very useful hardboard and we can see its application in different indoor projects. From kitchen decoration to office design, the use of MDF board can be seen in many places.

MDF boards are available in many shapes and sizes and if you are planning to cut them to your desired sizes, you will need the right tools for it. You can use any tool that can cut wood, but make sure it is suitable for the type of MDF you are using in the project. In this blog, we will talk about blades you should use for MDF Cut to Size.

Prefer Carbide-Tipped Blade

Since MDF boards are made of high glue residuals, steel blades lose their efficiency quickly. You can use handheld cutting equipment or circular saw to bring the MDF boards into your desired sizes. If you use blades that come with a higher number of teeth then they will help you get rid of issues like chipping. Here, you should remember that blades with higher number of teeth generate more dust than normal blades.

If you are using a table saw to cut the MDF boards, make sure it comes with a vacuum removal system. Heavy dust build up can create trouble for the motor; the vacuum removal system will eliminate dust build-up.

Blades for Sensitive Cuts

Carpenters often use jigsaw blades to cut MDF, but such tools will not be an ideal option if you are preparing for sensitive cuts like curved. Steel-cutting blade can be a suitable option for such cuts, as they cut more slowly and take care of the edges during sensitive cuts.

A multipurpose cutting blade can be useful for sensitive MDF Cut to Size. Such blades can be used with rotary tools and they can also cut notches of the cabinets made of MDF boards.

Use Multipurpose Tool for Routing

If you are searching for a blade for perfect routing, you should use a small conventional router. You can opt for blades used to rout wood, but the higher amount of dust can create destruction during the work. Carbide-tipped blades can also be a useful tool, as can work well even during high dust production. Try to use small tools for MDF Cut to Size, as they will help you keep a close watch on your work.

If you are a non-professional or have not done such a job before, then you should prefer the hand of experts for such projects. If you do not have any in-hand experience, visit the websites of cutting service providers like www.buildersmerchant.com.

Monday 19 November 2018

Benefits of Chipboard Flooring

Builders merchant 0 Comments

Chipboard flooring is nothing but an engineered wood product. Chipboard is made with good quality wood particles which are pressed hard to bind all of them together. The end product is extremely sturdy and smooth. Chipboard flooring has been essentially made for floors only. Here we will tell you about some of the benefits of using chipboard flooring. This product is highly durable, strong, and rigid in nature. Plus they are extremely affordable as well. Modern-day Chipboard Flooring are made essentially for domestic purpose. It can resist water easily and can survive in damp and humid conditions too. Which means you can easily install them in your kitchen and bathroom without worrying about anything.

Cost Effective:

First and foremost, since chipboard flooring is an engineered wood product and is made out of the waste product of the finest quality of woods, they are extremely affordable. This will never become heavy on your pockets and you will be able to design your floor efficiently.

Easy to Install

Since chipboard flooring is essentially made for your floor, they can be easily installed as well. It saves a lot of time and gets fitted perfectly. All the side will be joint perfectly. They are easy to cut and also easy to fix, all the expert will need is some screws, nails, and adhesives.

Safe For The Entire House

Another good quality about chipboard flooring is that it is safe for the complete house. Buildersmerchant.com meets all the standard requirement of chipboard floorings. It is strong, fire retardant, and resist moisture as well. They can be used in humid areas as well. You can easily install them in your bathroom as well as the kitchen.

No More Creaking Sound

People always complain about the creaking sound that comes from their floor, but with chipboard flooring, you can walk with a peace of mind. Even if it gets older there won’t be any cracks and wobble.

It is Smooth And Consistent

Since it is an engineered wood product, the surface is even and consistent. This smoothness consistency makes them an easy product when installed. You can finish installing it in a short duration of time and it also minimize wastage as well. Another good reason why Chipboard Flooring is cost-effective.

So, here are the biggest advantages of buying chipboard flooring. You can visit buildersmerchant.com online and place your order. Go through their plethora of products, get a price quote in just a few minutes and have a wonderful experience. Remember you should always buy chipboard flooring from someone you can trust because after all, it is about your hard earned money. Do remember that chipboard flooring becomes highly cost effective too. Rest you know why you should buy chipboard flooring. Good luck!

Tuesday 30 October 2018

Here’s How To Create Your Very Own Wheelie bin?

Builders merchant 0 Comments

Every household has a green recycling bin. This is the bin where you put your garden waste. The problem arises when your garden waste is thrown out but you are still left with the compostable food waste of your house. Now, these you can’t be thrown into the green recycling bin.

So, what can be done here is to create your own Wheelie Bin where you can compose all these waste. You can turn a green wheelie bin into a compost bin for yourself. Let’s see how you can create one for yourself now.

Things that you will need

• You will need a wheelie trash bin, you can choose a 45-gallon multi-purpose bin in this case. Go for a firm one which has thick plastic walls. This will last longer.

• A few concrete blocks

• Hinges. You can choose stainless steel though to avoid corrosion.

• Next are some machine screws

Tools that will be required

• A jigsaw and some jigsaw blades

• You will also need a drill and some bits

• Next important tool is a measuring tape

• Keep a permanent marker handy too.

• Sandpaper

Procedure to make a wheelie bin

• First, start your process of creating a wheelie bin with a permanent marker and a measuring tape. Mark all the areas where you will want the door or the flap to be.

• Now the areas which you have marked using a permanent marker, drill a hole into it. You will have to cut the four sides. Now, use a jigsaw and cut out the flap. It’s alright if you need some time to do it. Just make sure to cut it as straight as possible.

• For the next step, you will need the marker again. Mark the position of the barrel and hinges to fix the position of the screw holes.

• Now, get the screws and screw the barrel and holes but on the outside of the flap.

• Again mark the position of the hinges and barrel to fix the position of the screws on the outside door or flap.

• Use the drain grate piece to mark the holes where you wish to put the main air holes. For this, you will need to use the marker once again.

• Now push the drain pieces. Check if it is fitted tightly. If yes, then you don’t need to use the adhesive glue. But, just to be extra cautious you can use the glue. To do as such, run a dot of paste along within the edge of the deplete piece where it will contact the gap in the container. Try not to stress, the paste does not stream to within the canister, where it could possibly get blended into the manure.

• For extra wind current, penetrate gaps in the canister's top

This way your very own wheelie bin is ready to use. Easy right. Just make sure to gather all the required tools and things to create a working wheelie bin. Follow all the steps carefully and you are good to go.

Tuesday 2 October 2018

Things you Need to Consider When Buying Plastic Decking Boards

Builders merchant 0 Comments

Renovating your home’s outer space? Well, then ensure to do a little research and then make changes accordingly.

Well, building or updating your deck space can definitely boost the curb appeal of your home.

So, what are you waiting for?

Just pick up your phone, do some research, hunt for high-quality Plastic decking boards and get started with the renovation project.

Here in this guide, we will be discussing some of the considerations you need to make when buying plastic decking boards:

1. Easy Maintenance : This is definitely an important consideration when buying decking boards. You need to choose the one that demands low maintenance and can last longer. Plastic decking boards require much less care and maintenance as compared to the other options.

2. Quick and Easy Installation : You definitely don’t want things to get messed up. So, make sure to choose the one that offers quick and easy installation. This way you can ignore any complications or issues while setting up plastic decking boards.

3. Quality Over Quantity : Ensure that the decking boards you are willing to hire are good in quality. You don’t want to end up being disappointed about your choices. Well, that’s why you should always consider quality over quantity. '

4. Complement your Home’s Design : Make sure that the plastic decking boards you are willing to hire can add elegance and value to your space. It’s important to consider the pattern and colour of the plastic decking for choosing the one that can match your home’s design.

5. Cost Involved : It's important to set up a budget and stick to it. Moreover, you need to be clear about what you can afford buying the decking boards accordingly.

Are you looking forward to buying Plastic decking boards? If yes, then Builder Merchant can turn out to be the right choice for you. They have an amazing collection of deck-boards to choose from.

Monday 18 December 2017

What can you do with oak sleepers?

Builders merchant 44 Berth , Merchant House 0 Comments

If you want to give a new look to your garden and you are looking for a versatile product with lots of benefits, look no further than railway sleepers. There is a wide range of railway sleepers that are available in the market. Based on your requirements and budget, you can choose its color, size, and type of wood. Whether you choose oak sleepers, karri sleepers or jarrah sleepers, it will give an elegant and charming look. It acts as the centerpiece of your dream garden. Wooden sleepers are very popular nowadays. Many people use it to edge a vegetable patch, create a rustic bench, etc.

See, what these sleepers can do for you?

1.Mark out a path: Sleepers can provide an attractive pathway to your garden. It can set in the soil easily and a very good alternative to traditional paving slabs. You can save your money as you have no need to paint it.

2.Build a bench: Sleepers are often using to create a rustic look, but you can also use it to build a bench. It will help you to cover your garden space offering a beautiful look. Moreover, it will last longer as compared to the other garden furniture.

3.Build Stairs: If your garden has two different floor levels, you can use sleepers to create steps. It is a perfect way to give an informal cottage garden appearance. Moreover, wooden steps will be less slippery as compared to stones in the rainy season.

4.Build Boundaries: If you want to create the partition in your garden then railway sleepers can be the best choice. It can be directly set into the garden and act as a small border. It is an effective way to keep your garden neat and clean. You can install it according to your desires.

5.Raised Vegetable Beds: It is one of the most popular uses of railway sleepers. It can turn out to be the best decision for perfect drainage and keep pathway weeds away.

These were some major benefits that you can reap from railway sleepers. If you are looking for a store from where you can buy oak sleepers, Build Merchant Group can help you. For more information, explore the website here: www.buildermerchant.com

Monday 16 October 2017

Phenolic Plywood and Its Amazing Features

Builders merchant Anti-Slip Plywood Sheets , phenolic film-faced 0 Comments

Also known as phenolic film-faced concrete plywood, phenolic plywood is used in the construction industry, to a large extent. It is used to create wooden molds which are further useful for concrete casting, like for making slabs or pillars of concrete. The main reason behind its increased use in the concrete casting is the waterproof feature which prevents the concrete from sticking to the surface.

However, there are many other features of phenolic plywood for which it is preferred. These features include:

Durability

There is no doubt about the durability of the phenolic plywood as the concrete casting involves both dry and wet conditions. It is due to its high durability only that it withstands the changes effectively.

Strength

Concrete is made by mixing sand, cement and crushed stone, all together with water. When the mixture becomes hard, it exerts pressure on the plywood mold. And as phenolic plywood withstands these forces, it illustrates how strong it is.

Shiny surface

The phenolic film layer used on the plywood makes the surface glossy and shiny. It is due to this feature that concrete does not stick to the surface. Not only it protects the plywood from damage but it also gives a smooth finish to the concrete surface, which is not possible with other methods.

Reusability

After the concrete casting process is finished, the phenolic plywood can be dismantled and reused somewhere else. But you need to take special care while erecting the form work from the plywood sheet to keep it protected from any type of damage.

Quality standards

Undoubtedly, due to the critical uses of the phenolic plywood, it is built to meet the highest quality standards which are superior to the furniture-grade plywood. No doubt these standards make it costlier but remember that quality always comes at an extra cost.

Thus, phenolic plywood lasts longer provided that it is well cared for. You can make it more durable by avoiding scratches, cleaning it properly and by applying mold oil on its surface on regular basis.

Are you planning to buy phenolic plywood? You can trust Builder Merchant for the quality that comes at affordable rates. Visit https://www.buildermerchant.com/ to have a look at their products.